HK Heckler & Koch 416 6mm BB Rifle Airsoft Gun E1 Stock

what our customer say this product:

Powered by

1. Eric Verified Buyer – 16 March 2024

   I ordered this stock for my sons air riffle for Easter gift, the retention screw/pin is missing for the adjustable length. Unable to use. Also many chips in the plastic, like it was used or sent back by another buyer.

   

2. tyler harris Verified Buyer – 2 July 2024

   Great quality! As good as the 250$ real steel one. This is a very tight fit tho and I had to file the rail part on my mil spec buffer tube but its still worth it. Why buy the real one when this airsoft stock fits my real ar15? 4 stars only cuz its so tight on buffer tube.
   

3. Smith Verified Buyer – 22 November 2024

   With a decent length file and maybe 3 min of sanding fit perfectly on my mill spec buffer tube.
   

4. Anonymous Verified Buyer – 3 March 2025

   Do NOT alter your buffer tube! Especially not for a $40 stock. Very durable feeling, and rock solid on tube after following mods: retract locking mechanism of stock using Allen key to hold lever in the open position. Locking pin should be flush or lower than bore of stock. using wooden broomstick, spiral sheet of sandpaper around, using paper towels between spiral layers to adjust fit (I started with 120 grit, finishing with 1000 grit). Rotate sanding stick in proper direction to retain sandpaper to remove material. The slot depth is adequate on stock, but does need to be widened. Paint stirring sticks with sandpaper glued to them works well, again going from coarse to fine grits. I did polish my buffer tube with 1500 then 2500 grit to smooth operation. Stock is rock solid with stiff, but very useable adjustability. Very comfortable, and highly recommended. On mil-spec tube (VLTOR A5 tube).
   

5. Gilbert Verified Buyer – 8 March 2025

   Its solid and just like the real deal i shoot it with my actual ar 15 and it works well. You will have to grind the inside of the tube hole because it will not fit straight out the box
   

6. Anonymous Verified Buyer – 9 March 2025

   Fits the MIL-SPEC buffer tube with a little work. From a Dremel Sanding Drum, on at 3,500 RPM`S. The sides of the rail, and the upper portion of the tube, 1/2 up need a little more than 1/16 of an Inch, of material taken off the buffer tube… for it to work. Then I hit the buffer tube with some Aluminum Black, and your in business. A Top Tier Item for next to nothing when compared to the OEM Version. Same Quality like the OEM H&K for just $45 bucks. You just cant go wrong. Or if your made out of money just spends Thousands of dollars and buy the Real HK416. Just my 2 cents. Fast Shipping and an Awesome Company to buy from. Top Shelf all the way! A+++++. 5 STARS
   

7. Angel Mena Verified Buyer – 14 May 2025

   Great quality stock, however it does not fit onto my M4 variant Airsoft rifle, the hole of the stock is too tight so as of now is useless…
   

8. trendon Verified Buyer – 10 June 2025

   do not buy unless you are willing to grind or file down the inside of the stock. you are better off buying a legit HK 416 stock for $200